The Perfect foamie for FPV use, the Busy Bee not only has a large canopy and rear facing pusher motor mount as you would expect, it has several other features that make for an adaptable and practical FPV platform.
Although the motor mount is, as usual for an FPV model, in a pusher configuraion, this model has a good prop/boom clearance, meaning you are not limited to purely high kv motors, in fact a 9x5 prop is included. Also, the motor mount is a sturdy alloy, which will take a variety of motors. The model features 2 battery trays mounted under the fus, ideal for shifting your flight pack around for correct C of G, depending on the equipment fitted. Good size wheels & steerable nosewheel also add to the practicality, as does the band mounted wing, a lot of FPV platform, for not a lot of money, ideal for your 1st FPV model!
Spec.
Wing Span: 1120mm
Length: 1085mm
Flying Weight: 650g
Wing area: 24dm2
Wing Load: 27g/dm2
4 Channel (throttle, aileron, elevator, rudder/steering)
Requires:
Your own 4 Channel TX & RX
1300mAh 3s ~ 1700mAh 3s Lipoly Battery
3 x 9g Servos
18A ESC w/BEC
Brushless outrunner 2822 1200KV
Non disp.
