interamente tagliato a laser in balsa poi finito con qualità cinematografica e naca in fibra di vetro questo piccolo modello di dimensioni extra 330 L . Dotato di un robusto un carrello in alluminio e ala CF tubo l'extra 330 è un modello di qualità che si distinguono dalla folla. Si richiederà 4 x 9 g servi per le superfici di controllo, una dimensione 28 brushless , ESC bis, 1800mah 3S1P lipo per completare il kit.
Crafted from Laser cut ply & balsa then finished with quality covering film and a fiber glass cowl this little park flyer sized Extra 330L kit will make a fine addition to your hanger. Featuring a sturdy one piece aluminum landing gear and CF wing tube the Extra 330L is a quality model that will stand out from the crowd. You will require 4 x 9g servos for the control surfaces, a 28 size brushless out runner, 35a ESC, 1800mah 3S1P lipo and a suitable prop and spinner to complete the kit.
This model also features a large removable canopy to allow easy access to the battery compartment and electronics. The canopy design and construction follows the same molding principles and quality finish as many larger models. All mounting hardware is included along with a steerable tail wheel set.
Specifications:
Wingspan : 980mm
Length : 880mm
Wing Area : 19sq.dm
Flying weight: 520g
Motor: 28-36 to 35-36 Size ~1100kv (Required)
ESC: 35A
Battery: 11.1v 3S1P 1800mah 25c (Required)
Batter Compartment: 110L x 45W x 42H mm (MAX)
Servo: 4 x 9g (Required)
Required:
28 to 35 Size ~1100kv
35A ESC
11.1v 3S1P 1800mah 25c
4 x 9g Servos
Your own Tx/Rx
Non disp.
