FPV 5.8G Built In Receiver and Battery With 7" No Blue LCD

Combo Included :

1. 7" No Blue LCD Screen (with build-in 2S Lipo Battery)
2. Built 5.8G Receiver
3. 2S Lipo Battery Cable (for charging)

Introduction:
This is the newest professional FPV 5.8G Display System recently. It comes with a 7 Inch high quality LCD screen, build-in 5.8GHz receiver and the most important is that it comes with a build-in 2500mAh 2S 7.4V Lipo Battery.
Unlike the older version, you do not need to connect battery to the screen externally. Therefore no wires will be outside the screen. This make your equipment look more professional and clean.
Moreover, there is a voltage checker LED in the front side of the screen. Green LED light on is ready for use. When the Red LED is turned on, the screen can still work for around 15 mins and you should charge the battery ASAP.

Features:
- Build-in 5.8GHz Receiver
- Build-in 2S 7.4V 2500mAh Lipo Battery.
- Working hour: 2-3 hours
- Able to charge with standard Lipo Battery Charger with the Balance Connector included.
- Charging Current: < 1.5A
- Build-in two color LED voltage checker (Green LED = Ready to use, Red LED = Charge the battery ASAP)
- Discharge the battery for around 3.8V per cell if the Screen System will not be used shortly.
- Working Temperature: -10°C to 45°C

Notes : MAX Charge 1 A