There is always something about a large Bi-plane that appeals to RC pilots, they have real presence on the ground and a certain elegance in the air that is hard to match, this amazing large scale Pitts 12 is so impressive and you have to look really hard to tell that it is a foamy!
Of course it isnt any old foam, its highly compressed EPO which not only gives the Pitts an almost balsa model look, it also means that its as tough as old boots! There are so many impressive features on this stunning bipe, the under-carriage is heavy duty, full size servos are pre-fitted for the rudder and elevator, the scale detail, the whopping 3 blade scale prop and spinner, the pre-fitted and very powerful brushless outrunner, the list goes on! The Pitts is easy enough to build and all hardware is included, you will need to add your own ESC & Lipoly to get into the air with this amazing looking aerobatic Bi-Plane.
The Pitts features huge wing joiners/tubes and fast assemble wing and tailplane rigging, once assembled it is very ridgid and it needs to be, this is a very capable aerobatic model! Power from the huge outrunner on 6s is really impressive and coupled with the amazing looks and performance of this huge foam Pitts 12, this is a model that will provide the RC pilot with a truly memorable days flying every time it goes to the field!
Specs:
Wingspan: 1600mm
Length: 1490mm
Flying Weight: 4500g
Servo: 9g x 4, 40g x 2
Motor: 5060 390kv Brushless Outrunner
Requires:
Your Own 6 Channel TX/RX
100A~120A ESC
UBEC
3700mAh~4500mAh 6s Lipoly Battery
Non disp.
