TURNIGY AerodriveXp SK Series
AerodriveXP SK Series motors are designed for those who want the very best in outrunner technology for their R/C plane. Typically an efficiency improvement of around 8-10% can be seen over similar classed motors. This is in part due to the following;
Stator Laminations: .2mm
Magnet Type: N45SH
Bearings: Dual oversize (Japanese)
Shaft: 10mm Hardened
Model: SK63-64 230
Kv: 230rpm/v
Turns: 9
Resistance: 40m-Ohm
Idle Current: 1.7A
Shaft: 10mm
IC Size Eq: 1.60 (OS 160)
Weight: 690g
Rated Power: 3150W
ESC: 100A (HV)
Cell count: 8-10S
Suggested Prop: 22x12 / 24x10
Power equivalent : 30% scale warbirds or 3D planes up to 100inch and anything requiring a 45cc gas engine.
This is a big motor which runs well on 10S 6,000mAh 20C lipolys swinging a 22inch prop.
In our tests we ran a 24x10inch prop on 10S with controlled throttle for extreme 3D on a 90inch Edge540.
Motor: 63mm x 67.4mm