The Target Drone is a great little FPV platform that has been specifically designed for the job and not only is the kit cheap to buy, this great little model is also cheap to get in the air.
The Target Drone features an FG fuselage that is open at the front for camera mounting, there is also a built in anti-glare cover. The model is designed for a pusher motor as you would expect and it also features a mid mounted, large hatch for battery and equipment access, the large and open fuselage area not only has plenty of room for your FPV equipment and lipoly, it also provides plenty of battery and ESC cooling from the open front fuselage. The under carriage is robust, featuring screw in alloy leg's at the rear and a steerable nose wheel up front.
The Target Drone is a pretty quick build, servo extension leads are pre-installed into the balsa wing, which is mounted on a CF rod and epoxied into place. The supplied hardware is comprensive and the overall parts count low, meaning you will be experiencing FPV in double quick time. The Target Drone, with it's tailess, swept wing is one of the most unusual and interesting EP FPV models in it's class yet and is sure to get people's attention wherever it flies!
Features:
Robust FG Fuselage
Open Front Camera Mount with Anti-Glare Cover
Large Mid-Mounted Access Hatch
Balsa Constructed Wing & Winglets
Sturdy Under Carriage
Steerable Nose-Wheel
Low Parts Count
All Hardware Included
Pusher Configuration
Specs:
Wingspan: 1520mm
Length: 500mm
Flying Weight: 500g ~ 700g
Wing Area: 17.2dm2
Wing Loading: 29g/dm2 ~ 40.6g/dm2
Requires:
Your Own 4~6 Channel TX/RX with Elevon Mixing
28-36 Brushless Outrunner Motor 1800kv
3 x 9g Servo
30A ESC w/BEC
1300mAh ~ 2200mAh 3s Lipoly Battery
FPV Equipment
Non disp.
